- A+
Introduction
The Brother DCP7090DW printer is a great option for those who need a compact and affordable printer that also has scanning and copying capabilities. However, as with any printer, eventually, you'll need to replace the toner. In this article, we'll guide you through the steps to replace the toner on your Brother DCP7090DW printer and reset it correctly.
Why Replace Toner?
Over time, the toner in your Brother DCP7090DW printer will run out, causing the quality of your prints to deteriorate, and eventually, the printer will stop working altogether. If you notice streaks or faded prints, it's likely time for a toner replacement. Additionally, you may also receive an error message indicating low toner levels. In any case, it's important to replace the toner promptly to ensure your printer's continued functionality.
Step-by-Step Toner Replacement
Follow these simple steps to replace the toner on your Brother DCP7090DW printer:
Turn off your printer, unplug it from the power source, and wait a few minutes to allow it to cool down.
Open the printer's front cover by pulling the lever located on the right side of the printer.
Remove the old toner cartridge by pulling it out using the handle located on the top of the cartridge.
Remove the new toner cartridge from its packaging and gently shake it from side to side to evenly distribute the toner.
Remove the protective cover from the new toner cartridge.
Insert the new toner cartridge into the printer, making sure it snaps into place.
Close the printer's front cover.
Plug in your printer and turn it back on.
Resetting the Toner Cartridge
After replacing the toner cartridge, it's important to reset the printer's toner level indicator to ensure accurate readings going forward. Here's how to reset the toner cartridge on your Brother DCP7090DW printer:
Make sure your Brother DCP7090DW printer is turned on.
Open the printer's front cover.
Press and hold the "OK" button for approximately two seconds.
Release the "OK" button once the message "DRUM UNIT?" appears on the printer's display screen.
Using the arrow keys on your printer, select "1 YES" and press "OK."
The printer should now display "ACCEPTED" and the toner level indicator should be reset.
Close the printer's front cover.
Conclusion
Regular toner replacement is essential to maintain the quality of your Brother DCP7090DW printer's prints and ensure that it continues to function properly. With this guide, you should now be able to replace the toner cartridge on your printer and reset the toner level indicator with ease. With these steps, you'll be able to continue printing high-quality documents for years to come.
